Brighten up any space with LED strips that come in a variety of temperatures and colors, easy to install. Placing it on the ceiling can provide some bright lightings, how do you install them? We’ve listed some easy steps to help you install LED strip light on your ceiling.
Table of Contents
1. Choose the LED Strip you want
2. Check the type of Ceiling
3. Cutting the Right Size of LED Strip
4. Locate the Power Source
5. Install the LEDs On The Ceiling
6. Connect the LED strip to a power source
7. Cover the back with tape
Choose the LED Strip you want
There are many light strips to choose from on the market, but different light strips have different effects. First of all, you need to consider the needs of your installation. Some people use it purely for lighting, and some people use the living room for work and entertainment. Therefore, dimmable RGB lights can achieve the best of both worlds in the same space.
Check the type of Ceiling
First, you need to mark out the length and width of the ceiling. Make sure it’s a smooth surface, not uneven. If the ceiling is a plasterboard structure, then you can use traditional light fixtures. Plan your route, find a power source, and measure the length of light strip you need.
Cutting the Right Size of LED Strip
After unpacking the light bar, we need to cut the corresponding length of the light bar according to the length of the ceiling. Make sure the light strips are fully connected before you start, then plug them in.
Locate the Power Source
To secure the power supply, depending on the length of the LED strips used, there may be one power supply unit per box, or only one for multiple strips. So you’ll need to place it near your power outlet, and it should provide enough output for your needs.
Install the LEDs On The Ceiling
First of all, you need to drill holes in the ceiling, preferably with an electric drill, so as not to damage the surface of the ceiling with excessive force. There are many ways to install the light bar, you can use 3M glue on the back of the LED, or you can install a clip to fix it. Of course, you can also use it with accessories.
Connect the LED strip to a power source
Now you can use an extra length of LED strip, or extension cord to connect it to your outlet, and turn them on. If you are not sure about the wiring in your home, we strongly recommend that you seek help from a local electrician.
Cover the back with tape
We need to use tape to cover up any unwanted visible cables and wires, otherwise, it looks like a mess! Make sure your LED strips blend in with the ceiling as much as possible.
For more LED strip options, see our entire selection of LED strip lights, hot-selling COB flex strip, 360 degrees emitting R25 neon strip, RGB led strip, if you’re interested in install ceiling LED strip lights to your home, contact us now to get started!