It’s a cool and fun way to install LED strip lights on your motorcycle. Plus, adorn its appearance and visibility, adding style and security. In this article, we will explain a detailed step-by-step guide on how to install LED strip lights on motorcycles, which you can easily install at home.
Prepare the Materials and Tools
Ready for Materials
Before installation, you need to prepare all the tools and materials needed. Includes: LED strip lights, power supply, LED controller, 3M adhesive backing, 18 or 20-gauge wire, sandpaper, pliers, screwdriver, soldering equipment and heat shrink tubing (cut if needed), electrical tape, zip ties, wire terminals Connectors, electrical tape, and in-line fuses, etc.
Test the LED Strip Lights first
Test the strip by properly connecting the positive and negative connections of the LED strip to the positive terminal of the battery. Make sure each individual strip is fully lit. When testing strips, separate all strips of the same size into separate piles. This will make it easier to use them later.
Where to Install the LED Strip Lights
Start by identifying the ideal location for the LED strip lights to mount on the motorcycle, common areas include under the fuel tank, along the frame, or on the fenders.
You can try out several design options, take measurements and plan wiring paths/to ensure a clean and discreet installation.
Fix a Position to Install the Switch
You’ll need to go buy a switch and there should be three leads on the back – positive, negative, and ground. Choose a location that is comfortable and convenient to control, and you can install the switch in this location.
Install the LED Strip Lights on the Motorcycle
Stick it on the LED Strip Lights
Now that you have identified where the LED strip lights will go, Cut the LED strips to the appropriate size, then attach them to the motorcycle. There is 3M adhesive behind the LED strips, so you can stick these strips naturally.
When placing the LED strip lights on the motorcycle, make sure to glue it with the wires pointing towards the battery.
Fixed Wiring
Use zip ties and adhesive clips to secure wires along the motorcycle frame or existing wiring harness. Make sure the wiring is neatly tucked away to prevent interference with moving parts or heat sources.
Test LED Strip lights
Before installing, we need to test the LED strips to make sure they are working properly. Temporarily connect power and check each LED strip for proper lighting and color output.
Check All installation
Finish Installation
After testing, double-check all connections. Secure any loose wiring if it’s okay, and tidy up the installation area. Test the LED strips again to confirm they are working properly.
Add Controller
If you choose the advanced RGB LED strip lights, you can better control the color and effect of the LED light strip. You can install a controller and connect it to the power supply. This allows you to switch between different lighting modes and adjust the brightness.
Maintenance
Regularly inspect the LED strip for any signs of damage or loose connections. Clean them with mild detergent and water, avoiding direct contact with electronic components. Be sure to disconnect the power before cleaning.
In conclusion
Installing LED strip lights on a motorcycle can enhance the look and increase visibility on the road. It’s a cool and trendy thing, but only if it’s installed safely and correctly. Remember to put safety first, follow local regulations, and maintain your LED strip light regularly. Then you can enjoy it.
FAQs
LED strip lights must be waterproof. Because it is primarily intended for outdoor use, it is intended to withstand vibration and severe stormy weather conditions.
Yes, many LED strip lights are available in color temperature and visible light. Of course, custom colors are also supported, and dynamic lighting effects can even be programmed.
The LED strips are low-voltage powered, so you can connect directly to a separate power supply for power.
The LED strip lights can provide enough brightness to improve road visibility. It is also very safe to drive on the road, and others can spot you in time.
Yes, all of our LED strip lights are dimmable. You can adjust the brightness according to your preferences, provided that you need a compatible LED controller.